This machine is ideal for the window fabricator.
Numerically controlled copy router with -90°, 0, +90° section rotation for working on 3 sides.
Z axis manual down-feed.
· Interpolating numerical control of machining movements on X and Y axes
· Manual lever with adjustable stop rod for the Z axis
· Electronic panel with graphic display to simplify program use and to program a working sequence on 3 faces
· Preset for receiving a working program made up of p.c. in office with program Arescam
· X axis movement with DC motor, high precision reduction unit and belt drive.Y axis movement with DC motor and recirculating ball screw transmission
· Work table with pneumatic rotation from -90° to 0 to +90°
· Work table height: 850 mm
· Micro-drop lubrication system with pure oil
· Work table rotation in complete safety for operators thanks to the selector and the deadman push button control circuit
· Horizontal pneumatic vices movable along the work table (n°4) with double (low and high) operating pressure with safety valves
· Capability for machining intermediates angles with manually adjustable indexed stop
· Tool diameter correction software compensates for sharpening
· Milling sizes: X=2600, Y=250, Z=180
· Three-phase motor: 1,1/0,8 kW – 2800/1400 r.p.m. – 230/400; V 50 Hz
· Working in complete safety thanks to the two deadman levers
· Profile reference stops on right and left ends of the machine
· Profile can be longer than X milling capacity (2600 mm) with the possibility of alternate use of stops on right and left of the machine
· Working pressure: 7 bar
· Air consumption per work cycle: 24 NL (normal litres)
· Chip bin
· Adjustable feet for machine location and anchor brackets
· Set-up for the installation of fumes
· Set-up for loading/unloading with shunter
PLEASE NOTE: We are advertising this machine on behalf of another company. This machine is located in Italy. All dealings are made with the Italian company. There might be VAT added to the product if you do not have a VAT number. Please call for details.
